Mv1
Introducing Essen deinki’s MV1 Series Micro Control Switches – designed for ultimate versatility and durability. These switches come with a 4-circuit, double-pole, double-break setup, offering robust control. They employ a snap-action mechanism, ensuring quick and precise contact changes through spring-controlled pivoted contact-carrying arms. With a total of 2 Normally Open (NO) and 2 Normally Closed (NC) contacts, they cater to a wide range of control needs. These switches are built to last, delivering both mechanical and electrical longevity. You can choose between silver or gold-plated solder terminals for enhanced performance. Plus, they come with push buttons in Red, Green, Yellow, Blue, Black, or White, allowing customization for your specific needs. Rest assured, Essen deinki’s MV1 Series complies with the IEC 1058-1 standard, confirming their commitment to meeting strict industry quality and safety standards. These switches are your trusted solution for demanding control applications, offering reliability and flexibility.
Characteristics
- 4 circuit, double pole, double - break.
- Snap action through spring controlled pivoted contact carrying arms.
- Rapid changeover of contacts.
- 2 NO + 2 NC contacts.
- Long mechanical & electrical life.
- Silver or gold plated solder terminals.
- Push buttons are available in Red, Green, Yellow, Blue, Black & White colours. State colour while ordering.
- Conform to IEC 1058-1 standard.
Product
Description
MV1( )P1/*
- Circuit facilities : Instantaneous double pole, double – break
- Current rating : 5A at 250V AC
- Switch terminals : Solder
- Actuating force : 562 gms. (max.)
- Release force : 60 gms. (min.)
- Pretravel : 1.5 mm. (max.)
- Movement differential : 0.90 mm. (max.)
- Min. center distance between two adjacent units: 19 mm.
- Cut-out size : Ø12.5 mm.
MV1( )P2/*
- Circuit facilities : Instantaneous double pole, double – break
- Current rating : 5A at 250V AC
- Switch terminals : Solder
- Actuating force : 562 gms. (max.)
- Release force : 60 gms. (min.)
- Pretravel : 1.5 mm. (max.)
- Movement differential : 0.90 mm. (max.)
- Min. center distance between two adjacent units: 25.4 mm.
- Cut-out size : Ø12.5 mm.
MV1( )P3/*
- Circuit facilities : Instantaneous double pole, double – break
- Current rating : 5A at 250V AC
- Switch terminals : Solder
- Actuating force : 562 gms. (max.)
- Release force : 60 gms. (min.)
- Pretravel : 1.5 mm. (max.)
- Movement differential : 0.90 mm. (max.)
- Min. center distance between two adjacent units: 25.4 mm.
- Cut-out size : Ø12.5 mm.
MV1( )P4/*
- Circuit facilities : Instantaneous double pole, double – break
- Current rating : 5A at 250V AC
- Switch terminals : Solder
- Actuating force : 562 gms. (max.)
- Release force : 60 gms. (min.)
- Pretravel : 1.5 mm. (max.)
- Movement differential : 0.90 mm. (max.)
- Min. center distance between two adjacent units: 19 mm.
- Cut-out size : Ø6.2 mm.
Note:
1. Place ‘S’ for silver plated and ‘G’ for gold plated contacts in bracket ()’ against ordering code of micro switch.
2. Add following suffix at * in the ordering code of micro switch for knob colour. Red = R, Green = G, Yellow = Y, Blue = BL, B = Black, W = White
3. Micro control switch MV1 – series can also be supplied with chrome plated metal shroud for P2 & P3 push button arrangements. Add suffix ‘M’ in ordering code. eg.: MV1() P2/* (for plastic shroud) MV1() P2M/* (for metal shroud)
4. For 4 pole change over micro switch with two basic MV1 micro switches, please add prefix ‘2’ before the series. eg. : 2MV1( )P1/*
1. Place ‘S’ for silver plated and ‘G’ for gold plated contacts in bracket ()’ against ordering code of micro switch.
2. Add following suffix at * in the ordering code of micro switch for knob colour. Red = R, Green = G, Yellow = Y, Blue = BL, B = Black, W = White
3. Micro control switch MV1 – series can also be supplied with chrome plated metal shroud for P2 & P3 push button arrangements. Add suffix ‘M’ in ordering code. eg.: MV1() P2/* (for plastic shroud) MV1() P2M/* (for metal shroud)
4. For 4 pole change over micro switch with two basic MV1 micro switches, please add prefix ‘2’ before the series. eg. : 2MV1( )P1/*